![]() |
|||||||||||||||||||||||||||||||||||||||
| Wireless Transmitters | |||||||||||||||||||||||||||||||||||||||
| Technical Specifications | |||||||||||||||||||||||||||||||||||||||
| With their encrypted wireless communication protocol and code-hopping technology, the Omnia series Transmitters offer reliability and security. Operating at 433MHz, the series includes the Motion Detector (OMN-PMD1), Door Contact (OMN-DCT1) and Remote Control (OMN-RCT1). When wiring becomes too difficult or when you want to add the ease of remote control operation, the Omnia series transmitters are the ideal solution for your Spectra, Digiplex or DigiplexNE system. | |||||||||||||||||||||||||||||||||||||||
|
Motion Detector (OMN-PMD1)
Door Contact (OMN-DCT1)
Remote Control (OMN-RCT1)
|
![]() |
||||||||||||||||||||||||||||||||||||||
| The
Omnia series transmitters use an encrypted wireless communication
protocol in conjunction with code-hopping technology to ensure reliability
and security. Code-hopping technology changes the encrypted code that is
sent by the transmitters after every transmission, thus resulting in a
highly secure and dependable system.
To enable the receiver to fully supervise the system, the motion detector and door contact can transmit a low battery, tamper, and check-in supervision status message. The check-in status can be sent at 12-hour, 6-hour, 12-minute, or 6-minute intervals. For highest security, select the shortest check-in time interval. Selecting the longest check-in time interval consumes the least amount of battery power.
|
|||||||||||||||||||||||||||||||||||||||
| Omnia
Wireless Motion Detector |
|||||||||||||||||||||||||||||||||||||||
| The
OMN-PMD1 is a dual element 433MHz wireless motion detector that combines
several technologies to ensure superior detection and stability. Its
patented Auto Pulse Signal Processing reduces the incidence of false
alarms by using a higher pulse count rate in the presence of low-level
signals. And with its Automatic Temperature Compensation and adjustable
sensitivity, the OMN-PMD1 gives you the flexibility you need to meet your
installation requirements.
The OMN-PMD1's unique Alive software will activate after having transmitted an open zone. During the next 5 minutes the OMN-PMD1 will flash the red LED to indicate a detection, but will not transmit any open zones. This feature provides a continuous detection display without compromising battery life, especially in high-traffic areas.
|
|||||||||||||||||||||||||||||||||||||||
| Omnia
Wireless Door Contact |
|||||||||||||||||||||||||||||||||||||||
| The
versatile 433MHz wireless door contact (OMN-DCT1) has two built-in
high-sensitivity reed switches that allow you to place the door contact
either vertically or horizontally.
A switch or a detection device can be connected to the universal
transmitter input terminals in order to provide wireless transmission of
the device's open/close status to the Omnia Wireless Receiver Module.
|
|||||||||||||||||||||||||||||||||||||||
| Omnia
Remote Control |
|||||||||||||||||||||||||||||||||||||||
|
The OMN-RCT1 is a water-resistant 4-button remote control that can be programmed to perform up to 8 functions, such as arming, disarming, generating panic alarms, and activating PGMs. The simplicity it provides and its reliability make the Omnia Remote Control an indispensable companion to your wireless system.
|
|||||||||||||||||||||||||||||||||||||||